manualshive.com logo in svg

Samsung SRD-442, User Manual, Page: 48 / 124

Share
Download
Samsung SRD-442 User Manual Download Page 48

48_

 

using the DVR

using the DVR

Monitor

You can configure information to be displayed and its format for Spot Out monitor.

Setting the Monitor

Using the mouse may help make setup easier.

1. 

Use the up/down buttons (

) in <

Device

> window to 

move to <

Monitor

>, and press [

ENTER

] button.

2. 

Select <

Monitor

>.

3. 

Use direction buttons (

◄ ►

) to move to a desired 

item, and set the value.

• 

Event Display : Sets the dwell time of the event channel 
display on the monitor when an event occurs.
If selected <

Continuous

>, it displays the channel until you 

press [

ALARM

] button to release it.

• 

Display : Displays only checked items on the monitor screen.

• 

Saving LCD setup : Set the duration of video display on the front LCD panel. It is set to 10 minutes by 
default. If no button is input for that specified time, the screen will turn off.

• 

Video Output : You can set the video output mode.

 

- Auto : The default is set to Composite. (In VGA mode, the “SAMSUNG” logo will be displayed)

The main video mode will switch to VGA if a VGA monitor is connected. Then, the Composite port will act 
as SPOT source.
The monitor distributor is not supported. 
To switch to VGA mode, turn off the DVR set and connect the VGA jack. (The VGA monitor will turn on)

 

- VGA : The main video mode will switch to VGA after the DVR set reboots; the composite source will be 

displayed on the spot screen.

 

- Composite : The main video mode will switch to Composite after the DVR set reboots. In VGA mode, the 

“SAMSUNG” logo will be displayed.

In Composite mode, you can set the Setup menu only with the tapping method on the screen.

4. 

When the monitor setup is done, press <

OK

>.

 

If you want to change the default output to VGA mode when the live screen is displayed with the beep after the system 
booting, press the remote control buttons in sequence:  [

FREEZE

] 

 [

VIEW

] 

 [

RETURN

 ( 

 )] 

 [

FREEZE

] 

 

[

VIEW

] 

 [

RETURN

 ( 

 )]. The DVR will switch to VGA mode with the beep after rebooting.

Monitor

Monitor

Spot Out

 Event Display 

OFF

 Display 

Date 

Time 

CH Name 

Icon

 Saving LCD setup 

10 min

 Video Output  

Auto

 OK 

Cancel

Display Position Setup

Mode

Summary of Contents for SRD-442





























































































































Reviews:

No comments