![background image](http://html1.mh-extra.com/html/samsung/sphd710/sphd710_online-users-manual_4272597168.webp)
154
4A. Important Safety Information
Specific Absorption Rates (SAR) for Wireless
Phones
The SAR value corresponds to the relative amount of RF
energy absorbed into the head of a user of a wireless handset.
The SAR value of a phone is the result of an extensive testing,
measuring and calculation process. It does not represent how
much RF the phone emits. All phone models are tested at their
highest value in strict laboratory settings. But when in
operation, the SAR of a phone can be substantially less than
the level reported to the FCC. This is because of a variety of
factors including its proximity to a base station antenna, phone
design and other factors. What is important to remember is that
each phone meets strict federal guidelines. Variations in SARs
do not represent a variation in safety.
All phones must meet the federal standard, which incorporates
a substantial margin of safety. As stated above, variations in
SAR values between different model phones do not mean
variations in safety. SAR values at or below the federal standard
of 1.6 W/kg are considered safe for use by the public.
The highest reported SAR values of the Samsung Galaxy S II
are:
PCS CDMA with WIMAX
:
Head: 0.40 W/Kg
Body-worn accessory: 0.61 W/Kg
Product Specific Use: 0.61 W/kg
Simultaneous Transmissions: 1.21 W/kg
WLAN
:
Head: 0.10 W/Kg
Body-worn accessory: 0.09 W/Kg
Product Specific Use: 0.08 W/kg
Simultaneous Transmissions: 1.21 W/kg
FCC Radio Frequency Emission
This phone meets the FCC Radio Frequency Emission
Guidelines.
FCC ID number: A3LSPHD710
More information on the phone’s SAR can be found from the
following FCC website:
http://www.fcc.gov/oet/ea/
.
FCC Notice
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to
operate the equipment.
Note:
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the
FCC Rules.
Summary of Contents for SPHD710
