![background image](http://html.mh-extra.com/html/samsung/sph-a940/sph-a940_service-manual_1189372015.webp)
SAMSUNG Proprietary-Contents may change without notice
3. Installation
3-1
This Document can not be used without Samsung's authorization
3-1 Installing and Removing the Battery
To install
, insert the battery into the opening on
the back of the phone making sure the plastic tabs
on the back are inserted into the matching slots in
the phone. Press down until the latchsnaps into
place.
To remove
, make sure the power is off. Push the
battery release latch up completely. Pull and lift the
battery away from the phone.
3-2 Using the Desktop Charger
1. Plug the AC cord from the charger into the
electrical outlet.
2. Insert the phone into the slot.
◇
A red light on the charger lets you know the
battery is charging.
◇
A green light lets you know that the battery is
at least 90 percent charged.
◇
A orange light indicates that the battery is
operating at a temperature that is too high or
low, or that the charger is not plugged in
correctly. Please check the charger and the
battery.
Specifications using DTC (Desktop Charger)
Battery Type
Standard Battery
(Li-ion, 1000mAh)
Extended Battery
(Li-ion, 1700mAh)
Charging
< 5 hours
< 5 hours
SEC Code
GH43-02160A
GH43-02161A