![background image](http://html.mh-extra.com/html/samsung/sph-a900/sph-a900_service-manual_1189362012.webp)
SAMSUNG Proprietary-Contents may change without notice
Circuit Description
2-8
This Document can not be used without Samsung's authorization
Frequency Synthesizer Circuit
The PLL(Phased Locked Loop) block consists of VC-TCXO(TCK301), PLL in S1M8690X and
VCO(VCO300). Input reference frequency is generated at VC-TCXO(TCK301) and the RF
local signal is generated at VCO. PLL compares the two signals and generates the desired
signal with a preprogrammed counter which controls voltage.
VC-TCXO
The VC-TCXO (TCK301) is a reference source of the frequency synthesizer. It provides 19.2MHz
reference frequency to PLL-IC. It is a voltage controlled temperature compensated crystal
oscillator having 19.2MHz ±2.5ppm frequency stability over all useful temperature range.
A correct frequency tuning is made by the control voltage.
2-3-2. Transmitter
Intenna
Intenna sends signal to the base station and receives the signal from the base station.
It is a tri-band Intenna and covers PCS band, CDMA band and GPS band.
RF Switch
It(U401:TQP4M3018) is used to switch the PCS path and CDMA path and the GPS
path.
The RF signal passes through PCS path when PCS_MODE is high(2.6V).
The RF signal
passes through CDMA path when CELL_MODE is high(2.6V).
The RF signal passes through
GPS path when GPS_MODE is high(2.6V). PCS_MODE, CELL_MODE and GPS_MODE are
digital signals from MSM6500 GPIO.
Duplexer
Duplexer(DUF402) passes the RF signal of Rx frequency range(881.49 ±12.5 MHz) and Tx frequency
range
(836.49 ±12.5 MHz). It provides appropriate attenuation of transmitted signal at the receiver input and
appropriate rejection of the transmit-generated noise in the Receiver band.
It also matches LNA input in receiving part and PAM(PAM400:WS1102) output in transmitting part with
the Intenna.