Samsung SOC-4030 Instruction Manual Download Page 17

Troubleshooting

If you have trouble operating your camera, refer to the following table. If the
guidelines do not enable  you to solve the problem, contact an authorized
technician.

Nothing appears on
the screen. 

The video image is
not clear.

The screen is dark.   

There is a problem with
the camera operation.
The camera surface is
too hot and black
stripes appear on the
screen. 

Problem

• Please check the power connection.

• Please check the video signal line connection.

• Please check the Brightness of Auto Iris lens.

• Please check if the lens is clean. Please clean the

lens with a clean cloth or brush.

• Please adjust the contrast feature of the monitor.

• Please make sure that the screen is not exposed

directly to a bright light. Please move the camera if
necessary.

• Please adjust the contrast feature of the monitor.      

• If you have an intermediate device, set the 75

/

Hi-z properly, and check the terminals. (refer to
page 14)

• Please adjust the brightness level of the Auto Iris

lens.

• Please check if an appropriate power source to the

camera complies with the manufacturer's standard
requirement, or if the voltage keeps changing.

Solution

The MOTION
DETECTION function
is not working.

Colors are not quite
right.   

The screen is flickering. 

L/L mode isn't able to
be selected.  

L/L mode is not
available.

COLOR (DAY & NIGHT)
mode is not working.

SENS-UP function is
not working.

Problem

• Please check if 'MOTION DETECTION' mode is

turned on.

• Please check if the MD LEVEL is too low. 

• Please check the setting of the MD AREA.        

• Please check the 'WHITE BAL' setting. (Please refer

to page 20)

• Please check if the camera is facing directly into

sunlight or fluorescent light.                                   

• Have you connected your camera to DC power

source? Connect it to AC power source.

• Please check the frequency of power supply (60Hz

for NTSC, 50Hz for PAL).

• Please check if the AGC menu is set to the OFF

position. 

• Please check if the AGC menu is set to the OFF

position. 

• Please check the limit of Sens-UP AUTO mode.

Solution

COLOR CCD CAMERA

User’s Manual

33

COLOR CCD CAMERA

User’s Manual

32

Summary of Contents for SOC-4030



















Reviews: