Samsung SNZ-6320 User Manual Download Page 96

Page: 96 / 150

alarm input

You can set the alarm input type, activation time, and operation mode.

From the Setup menu, select the

event ( )

> tab.

Click <

alarm input

Set whether or not to <

enable

Select the type.

•

Normal open : It is normally open,

but if it is closed, an alarm will be

triggered.

•

Normal close : It is normally closed,

but if it is open, an alarm will be

triggered.

Specify the <

activation time

•

Always : Always check if an alarm

occurs. It activates in operated mode when the alarm occurs.

If set to <

Always

>, the activation time cannot be changed.

•

Only scheduled time : Check if an alarm occurs at a specified day of the week for

a specified time period. It activates in operated mode when the alarm occurs.

•

[Clear (

)] : Reset all settings.

•

Minute : Click an area in Activation

Time and set the time by minutes.

•

Hour : Drag your mouse at Activation

Time and set the time by hours.

The transfer interval setting value must be

smaller than the preset activation interval

to succeed in image transmission.

setup screen

96_

setup screen

Summary of Contents for SNZ-6320























































































































































Search results

Summary of Contents for SNZ-6320

Reviews:

Samsung SNZ-6320, User Manual, Page: 96 / 150

Search results

Summary of Contents for SNZ-6320

Reviews: