Samsung SNZ-6320 User Manual Download Page 65

Page: 65 / 150

English

_65

●

Setup

Screen

viDeo & auDio Setup

video setup

From the Setup menu, select the

video & audio ( )

> tab.

Click <

video setup

Select a <

video source

> mode.

•

Flip mode : Turn upside down

the image that is captured by the

camera.

•

Mirror mode : Flip horizontal the

image that is captured by the

camera.

Click Activate or Inactivate of the analog

video output function.

Select the matching <

video type

> of

the display equipment.

Select the sensor mode.

You can set the number of frames

captured by the CMOS sensor per

second.

Refer to “

Video profile

” for the framerate setup range of the <

Video profile

> according to mode

setup. (Page 50)

If you set the sensor mode to 50 or 60 fps, <

WDR

> can be available in <

Back light

> mode.

Specify the privacy zone.

When done, click [

apply (

)

Summary of Contents for SNZ-6320























































































































































Search results

Summary of Contents for SNZ-6320

Reviews:

Samsung SNZ-6320, User Manual, Page: 65 / 150

Search results

Summary of Contents for SNZ-6320

Reviews: