Samsung SNV-5010 User Manual Download Page 51

Page: 51 / 102

English

_51

●

SETUP SCREEN

Date format : Specify the date format that will be displayed on the screen.

Time position display X, Y : Specify the position of time.

NETWORK SETUP

Interface

From the Setup menu, select the
<

Network (

)

> tab.

Click <

Interface

Set the <

Interface

> and <

IPv6 setup

as necessary.

IP type : Select an IP connection type.

Manual : Specify the IP address,
Subnet mask, Gateway, DNS1,
and DNS2.

DHCP : Specify the DNS1 and
DNS2.

PPPoE : Specify the DNS1, DNS2, Name and Password.

If you set it to <

Manual

>, you should specify the IP, Subnet mask, Gateway, DNS 1 & 2 manually.

MAC address : Shows the MAC address.

IP address : Displays the current IP address.

Subnet mask : Displays the <

Subnet mask

> for the set IP.

Gateway : Displays the <

Gateway

> for the set IP.

DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.

IPv6 use : Specify the use of IPv6.

Mode : If you select <

IPv6 use

>, the mode is enabled.

IPv6 address : Obtains the IPv6 address to access the IPv6 network.

When done, click [

Apply (

)

The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous
settings will be restored automatically.

•



•



Summary of Contents for SNV-5010







































































































Search results

Summary of Contents for SNV-5010

Reviews:

Samsung SNV-5010, User Manual, Page: 51 / 102

Search results

Summary of Contents for SNV-5010

Reviews: