Samsung SNV-3120 User Manual Download Page 47

Page: 47 / 109

English

_47

●

CAMERA SETUP

USING THE CAMERA MENU

Follow the steps below if you run the Web Viewer for setting the menus.

Launch the Web Viewer.

Click [

Camera Menu (

)

] in the left

corner of the Live screen.
The camera setup menu appears.

Use the Up/Down (▲/▼) buttons to move
to a desired item.

To change the value of a selected item,
use the Left/Right (◄/►) buttons.
To break down to a sub-menu structure,
click [

Enter (

)

] on the selected item.

: This arrow appears next to a menu that contains sub items.

: Exits the Menu Setup.

Select the <

SAVE

> or <

QUIT

> before exiting the menu setup to save the whole menu

setup or not.



If <

IV analysis function

> is enabled, camera’s OSD menu operation can be set as an event.

CONFIGURING THE MAIN MENU

PROFILE

You can select one of the specified configurations for a specific environment.

▲

▼

Go to <

PROFILE

camera setup

MAIN MENU

PROFILE

CAMERA SET

OTHER SET

SYSTEM INFO

Summary of Contents for SNV-3120














































































































Search results

Summary of Contents for SNV-3120

Reviews:

Samsung SNV-3120, User Manual, Page: 47 / 109

Search results

Summary of Contents for SNV-3120

Reviews: