English
_43
●
●
SETUP SCREEN
802.1x
When connecting network, you can choose whether using 802.1x protocol, and then install the certification.
1.
From the Setup menu, select the <
Network (
)
> tab.
2.
Click <
802.1x
>.
3.
Set the <
IEEE 802.1x setting(EAPOL using EAP-TLS)
>.
• Enable IEEE 802.1x : Specify the use of the 802.1x
protocol.
• EAPOL version : Select version 1 or 2.
• ID : Enter the client certificate ID.
• Password : Enter the client private key password. If the
key file used is not encrypted, you don’t need to enter it.
J
If the connected network device does not support the 802.1x protocol, the protocol will not operate properly even if
you set it.
4.
Install/remove the certificate.
• CA certificates : Select a public certificate that contains the public key.
• Client certificate : Select a public certificate that contains the client certificate key.
• Client private key : Select a public certificate that contains the client private key.
5.
When done, click [
Apply (
)
].
To install/remove 802.1x related certificates
1.
Press the [
Browse (
)
] button for each item and select a certificate to install.
2.
If no certificate is installed, you will see “Not Available” appearing next to the selected item.
3.
Press the [
Install (
)
] button to start installation with a message of “Installed” next to the item.
4.
Press the [
Delete (
)
] button to remove the certificate.
QoS
You can specify the priority to secure a stable transfer rate for a specific IP.
1.
From the Setup menu, select the <
Network (
)
> tab.
2.
Click <
QoS
>.
3.
Click the [
Add (
)
] button.
The IP list will be created.
4.
Enter an IP address to which you will apply QoS.
M
The default prefix for IPv4 is 32;
For DSCP, the default is set to 63.
Only the IP addresses that are set to <
Use
> can be prioritized.
5.
Select an IP to delete from the list.
Click the [
Delete (
)
] button.
6.
When done, click [
Apply (
)
].
Summary of Contents for SNP-6321H
Page 1: ...NETWORK CAMERA Network Setup Guide ...
Page 49: ......