manualshive.com logo in svg

Samsung SNP-6321H, Network Setup Manual, Page: 38 / 49

Share
Download
Samsung SNP-6321H Network Setup Manual Download Page 38

38_

 

setup screen

setup screen

WEB VIEWER-NETWORK SETUP

Interface

1. 

From the Setup menu, select the <

Network ( 

 )

> tab. 

2. 

Click <

Interface

>.

3. 

Set the <

Interface

> and <

IPv6 setup

> as necessary.

• IP type : Select an IP connection type.

 

- Manual : Specify the IP address, Subnet mask, 

Gateway, DNS1, and DNS2.

 

- DHCP : Specify the DNS1 and DNS2.

 

- PPPoE : Specify the DNS1, DNS2, ID and Password.

 

If you set it to <

Manual

>, you should specify the IP, Subnet 

mask, Gateway, DNS 1 & 2 manually.

• MAC address : Shows the MAC address.

• IP address : Displays the current IP address.

• Subnet mask : Displays the <

Subnet mask

> for the set IP.

• Gateway : Displays the <

Gateway

> for the set IP.

• DNS1/DNS2 : Displays the DNS(Domain Name Service) server address.

4. 

Set the <

IPv6 setup

>.

 

Set to <

Use

> to use IPv6 address.

• Default : Use the default IPv6 address.

• DHCP : Display and use the IPv6 address obtained from the DHCP server.

• Manual : Enter IP address and gateway manually and use it.

5. 

When done, click [

Apply ( 

 )

].

 

J

 

The IP addressing system will be defaulted to DHCP. If no DHCP server is found, the previous settings will be restored 
automatically.

 

Once completed with editing, click [

Apply ( 

 )

] to apply changes and the browser exits. After a while, connect 

again with the changed IP.

Summary of Contents for SNP-6321H


















































Reviews:

No comments