Samsung SNP-6321H, Network Setup Manual, Page: 22 / 49

network configuration
22_
network configuration
How to check and configure a dynamic IP address
1. Launch the IP Installer on the PC for IP configuration.
2. Click the [ Search ] button.
A list of network devices, whose IP addresses were
assigned by the DHCP of the IP router located at the same
router, is displayed.
3. Check the MAC address information and select a device to
configure.
4. Click the [ Manual Set ] button. You can check assigned IP
from DHCP in the generated window.
5. Click the [ OK ] button. Configuration is now complete.
M 
The password for camera access is identical to the “ admin ”
login password.
Default value is “
4321 ”.

In the IP installer, you can use the initial password, “ 4321 ” to
set IP Address, Subnet Mask, Gateway, HTTP Port, Device Port, IP type. After changing the network interface, for better
security, access the web viewer and change the password.

For the security purposes, you are recommended to use a combination of numbers, alphabets uppercase and
lowercase and special characters for your password.

HTTP Port is used to connect to the camera using web browser.
Default value is “
80 ”.

Device Port is to control video transmission.
Default value is “
4520 ”.