Samsung SNP-6320 User Manual Download Page 9

Page: 9 / 172

English

●

over

view

proDuct featureS

• full HD video Quality

• multi-Streaming

This network camera can display videos in different resolutions and qualities

simultaneously using different CODECs.

• web Browser-based monitoring

Using the Internet web browser to display the image in a local network environment.

• alarm

If an event occurs, the camera sends the relevant videos to the e-mail address or the FTP

server registered by the user, saves them in an SD/Micro SD card or NAS, or sends the

signal to the alarm output terminal.

• tampering Detection

Detects tempering attempts on video monitoring.

• motion Detection

Detects motion from the camera’s video input.

• intelligent video analysis

Analyzes video to detect logical events of specified conditions from the camera’s video

input.

• face Detection

Detects faces from the camera’s video input.

• audio Detection

Detects sound louder than a certain level specified by user.

• auto tracking function

The camera traces an object which is moving on the screen.

• auto Detection of Disconnected network

Detects network disconnection before triggering an event.

• onvif compliance

This product supports ONVIF Profile-S.

For more information, refer to www.onvif.org.

Summary of Contents for SNP-6320













































































































































































Search results

Summary of Contents for SNP-6320

Reviews:

Samsung SNP-6320, User Manual, Page: 9 / 172

Search results

Summary of Contents for SNP-6320

Reviews: