manualshive.com logo in svg

Samsung SNP-6320, User Manual, Page: 89 / 172

Share
Download
Samsung SNP-6320 User Manual Download Page 89

English 

_89

●

  

Setup 

Screen

viDeo & auDio Setup

video setup

1. 

From the Setup menu, select the 

<

video & audio (   )

> tab.

2. 

Click <

video setup

>.

3. 

Select a <

video source

> mode.

 

•

Flip/Mirror : Displays the video from 

the camera upside down or reversely.

 

•

Digital Flip : This limits the vertical 

screen navigation range of the 

camera lens.

4. 

Click Activate or Inactivate of the analog 

video output function.

5. 

Select the matching <

video type

> of 

the display equipment.

6. 

Select the sensor mode. 

You can set the number of frames 

captured by the CMOS sensor per 

second.

 

M

 

`

Refer to “

Video profile

” for the framerate setup range of the <

Video profile

> according to mode 

setup. (Page 67)

 

`

You cannot select <

WDR

> for the <

Back light

> mode if the sensor mode is 50 fps or 60 fps.

7. 

Specify the privacy zone.

8. 

When done, click [

apply ( 

 )

].

Summary of Contents for SNP-6320













































































































































































Reviews:

No comments