Samsung SNP-6201 User Manual Download Page 9

Page: 9 / 162

English

●

OVER

VIEW

PRODUCT FEATURES

• Full HD Video Quality

• Multi-Streaming

This network camera can display videos in different resolutions and qualities
simultaneously using different CODECs.

• Web Browser-based Monitoring

Using the Internet web browser to display the image in a local network environment.

• Alarm

If an event occurs, the event-related video will be transferred to the FTP/email specified
by the user or saved to the SD memory, or the event signal will be sent to the Alarm Out
port.

• Tampering Detection

Detects tempering attempts on video monitoring.

• Motion Detection

Detects motion from the camera’s video input.

• Intelligent Video Analysis

Analyzes video to detect logical events of specified conditions from the camera’s video
input.

• Face Detection

Detects faces from the camera’s video input.

• Audio Detection

Detects sound louder than a certain level specified by user.

• Auto Detection of Disconnected Network

Detects network disconnection before triggering an event.

• ONVIF Compliance

This product supports ONVIF Profile-S.
For more information, refer to www.onvif.org.

Summary of Contents for SNP-6201



































































































































































Search results

Summary of Contents for SNP-6201

Reviews:

Samsung SNP-6201, User Manual, Page: 9 / 162

Search results

Summary of Contents for SNP-6201

Reviews: