English
_87
●
SETUP SCREEN
To move to a desired preset
1.
Select a preset number that you want to move.
2.
Press the [
] button.
To configure the detailed settings for the preset
1.
Select the number of preset that you
want to configure.
2.
Press [
] to enter the preset editing
mode.
•
Preset No. : Display the number of
the selected preset.
•
Preset edit : You can change the camera settings according to the selected
preset.
For more information about the preset editing, refer to “
Camera Setup
”. (page 75)
•
Special : In <
After
action
>, you are
able to set whether auto execution is
activated or not after executing the
preset.
If the function is deactivated or no
auto execution is activated, the
preset execution is maintained.
•
Video analysis : Analyze the video of
the selected preset.
For details about the video analysis,
refer to “
Motion detection / Video
analytics
”. (page 109)
3.
When done, click [
Apply (
)
].
4.
Press [
] to return to the PTZ setup
screen.
J
After saving the preset, make sure to close preset editing mode by clicking [
] button or “Back”
button of the browser. If you change the settings of other camera while the window is still open,
this may cause an error.