English
_45
●
NETWORK CONNECTION AND SETUP
Auto Network Setup
Run <
IP Installer_v2.XX.exe
> to display the camera search list.
At the initial startup, both [
Auto Set
] and [
Manual Set
] will be grayed out.
M
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
1.
Select a camera in the search list.
Check the MAC address of the camera
on the camera’s label.
Both the [
Auto Set
] and [
Manual Set
]
buttons will be activated.
2.
Click [
Auto Set
].
The Auto Setting dialog appears.
The <
IP Address
>, <
Subnet Mask
>,
and <
Gateway
> will be set automatically.
3.
Enter the password.
Enter the password of “
admin
” account,
which was used to access the camera.
J
For the security purposes, you are
recommended to use a combination
of numbers, alphabets uppercase and
lowercase and special characters for your
password.
If you want to change the password, refer
to “
Administrator password change
” of
the user setup. (page 121)
4.
Click [
OK
].
Auto network setup will be completed.