English
_43
●
NETWORK CONNECTION AND SETUP
3.
In the <
Address
> pane, provide the
necessary information.
•
MAC (Ethernet) Address : The MAC
address imprinted on the camera
label is automatically displayed and
requires no user setting.
M
You can configure the static IP settings
only if the DHCP checkbox is unchecked.
If not using a Broadband Router
For setting <
IP Address
>, <
Subnet Mask
>, and <
Gateway
>, contact your network administrator.
4.
In the <
Port
> pane, provide necessary
information.
•
HTTP Port : Used to access the
camera using the Internet browser,
defaulted to 80.
•
VNP Port : Used to control the video
signal transfer, defaulted to 4520.
5.
Enter the password.
Enter the password of “
admin
” account, which was used to access the camera.
J
For the security purposes, you are recommended to use a combination of numbers, alphabets
uppercase and lowercase and special characters for your password.
If you want to change the password, refer to “
Administrator password change
” of the user
setup. (page 121)
6.
Click [
OK
].
Manual network setup will be completed.