manualshive.com logo in svg

Samsung SNP-6201, User Manual, Page: 109 / 162

Share
Download
Samsung SNP-6201 User Manual Download Page 109

Motion detection / Video analytics

Events of motion detection and video analysis can be set to trigger event signal output.

1. 

From the Setup menu, select the 
<

Event ( 

 )

> tab.

2. 

Click <

Event setup 

>.

3. 

Select <

Motion detection / Video 

analytics

> from <

Event action 

setup

>.

4. 

Set whether or not to <

Enable

>.

 

J

 

DIS cannot be used if Motion detection/
Video analytics is used.

5. 

According to your purpose, select from 
motion detection and intelligent video 
analysis.

6. 

Set <

Sensitivity

>, <

Size

> and <

Area

>.

When selected Intelligent Video 
Analysis, set <

Analytics

> too.

7. 

Specify the activation time and 
activation condition.

 

For more information about <

Activation 

time

> and <

Action

>, refer to “

Alarm input

”. 

(page 105)

8. 

When done, click [

Apply ( 

 )

].

●

  

SETUP SCREEN

English 

_109

Summary of Contents for SNP-6201



































































































































































Reviews:

No comments