manualshive.com logo in svg

Samsung SNP-6201, User Manual, Page: 107 / 162

Share
Download
Samsung SNP-6201 User Manual Download Page 107

Time schedule

You can set to save the video data at a certain interval as scheduled regardless of the 
actual occurrence of the event.

1. 

From the Setup menu, select the 
<

Event ( 

 )

> tab.

2. 

Click <

Event setup

>.

3. 

Select <

Time schedule

> from <

Event 

action setup

>.

4. 

Set whether or not to <

Enable

>.

5. 

Specify the <

Transfer interval

>.

6. 

Specify the <

Activation time

>.

 

•

Always : Always activates in operated 
mode at the set interval.

 

•

Only scheduled time : Periodically 
activates in operated mode at a 
specified time and date.

7. 

Specify the activation conditions.

 

•

FTP : Specify the use of the FTP transfer if an event occurs.

 

Refer to “

FTP / E-mail

” for more details. (page 101)

8. 

When done, click [

Apply ( 

 )

].

●

  

SETUP SCREEN

English 

_107

Summary of Contents for SNP-6201



































































































































































Reviews:

No comments