Alarm input 1~4
You can set the alarm input type, activation time, and operation mode.
1.
From the Setup menu, select the
<
Event (
)
> tab.
2.
Click <
Event setup
>.
3.
Select <
Alarm input
> from <
Event
action setup
>.
4.
Set whether or not to <
Enable
>.
5.
Specify an input device.
•
Type
- Normal open : It is normally open,
but if it is closed, an alarm will be
triggered.
- Normal close : It is normally closed,
but if it is open, an alarm will be
triggered.
6.
Specify the <
Activation time
>.
•
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
If set to <
Always
>, the activation time cannot be changed.
•
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
•
[Clear (
)] : Reset all settings.
•
Minute : Click an area in Activation
Time and set the time by minutes.
•
Hour : Drag your mouse at Activation
Time and set the time by hours.
J
The transfer interval setting value must be
smaller than the preset activation interval
to succeed in image transmission.
●
SETUP SCREEN
English
_105