English
_97
●
Setup
Screen
•
virtual line based rules
1.
Set <
iv analysis function
> to
<
enable
>.
2.
Set the type to <
Line/area
>.
`
The virtual line based rules can be specified
only if the intelligence video analysis type is
set to <
Line/Area
>.
3.
Set the event rule to <
virtual line based
rules
>.
4.
Click on both starting and ending points for the line on the screen to display the popup
dialog.
5.
Select a desired <
virtual Line Based rules
>.
•
Right : A movement from left to right in the virtual line will be detected.
•
Left : A movement from right to left in the virtual line will be detected.
•
Both : A movement in any direction in the virtual line will be detected.
6.
Click [
oK
].
To cancel the specified line, hover the mouse over the line and right-click to display
the context menu. Select [
Delete
] or [
clear (
)
].
7.
When done, click [
apply (
)
].
•
Defined area based rules
1.
Set <
iv analysis function
> to
<
enable
>.
2.
Set the type to <
Line/area
>.
3.
Set the event rule to <
Defined area
based rules
>.
4.
Click a corner point of a desired area in
the video to display the popup window.
5.
Select a desired <
Defined area Based
rules
>.
•
Entering : This event rule detects an event of object’s center entering into the
defined area from outside through the boundary of the area.
•
Exiting : This event rule detects an event of object’s center exits from the inside of
the defined area through the boundary of the area.
6.
Click [
oK
].
To cancel the specified area, hover the mouse over the area and right-click to display
the context menu. Select [
Delete
] or [
clear (
)
].
7.
When done, click [
apply (
)
].