manualshive.com logo in svg

Samsung SNP-5300, User Manual, Page: 76 / 134

Share
Download
Samsung SNP-5300 User Manual Download Page 76

setup screen

76_

 setup screen

 

`

For the best WDR performance, it is recommended to set the Iris mode to <

Auto

>. 

 

`

Since the auto focus operation can be repeated depending on the lighting condition if user 

backlight compensation is used, it is recommended to use the focusing mode of <

One Shot AF

> 

or <

Manual

>.

 

`

SSDR and shutter cannot be used in WDR mode.

 

exposure Setup

You can adjust the exposure level of the camera.

1. 

Select <

exposure

>.

2. 

Select each item and set it properly.

 

•

Brightness : Adjust the screen 

brightness.

 

•

Shutter mode : Adjust the electronic 

shutter of the camera.

 - ESC (Electronic shutter control) 

: Adjust the shutter speed 

automatically according to the 

ambient brightness.

 - Manual : Adjust the shutter speed of the camera manually.

 - A.FLK (Anti flicker) : Select this feature if you encounter a flickering screen due 

to a frequency mismatch with the ambient lighting.

 

`

Sens-up can be used only when the shutter type is <

ESC

>, and cannot be used when it is 

<

Manual

> or <

A.FLK

>. But Sens-up can be used regardless of shutter type when WDR mode 

is used. (apart from the influence of AGC)

 

`

The shutter cannot be used if the backlight compensation is set to WDR mode.

 

•

Shutter speed : Control the shutter speed manually.

 

•

SSNR3 : Specify the use of noise reduction.

 

`

SSNR3 mode cannot be used if the AGC mode is set to <

Off

> or <

Manual

>.

 

•

Sens-up mode : Automatically senses the darkness level at night or in a low 

contrast scene and extends the accumulation time accordingly for a bright and 

sharp image.

 

`

Sens-up can be used only when the shutter type is <

ESC

>.

 

`

Sens-up mode cannot be used if the AGC mode is set to <

Off

> or <

Manual

>.

 

`

The greater the video accumulation factor is, the brighter the screen is but the afterimage of a 

moving object grows accordingly and the Auto Focus mode may not operate properly.

 

`

If the gain is not used, Sens-up will be disabled.

Summary of Contents for SNP-5300







































































































































Reviews:

No comments