Samsung SNP-1000 User Manual Download Page 84

Page: 84 / 112

10X PTZ Network Camera SNP-1000

Memorize: Manual operations for minimum 120 seconds after

executing this function are memorized into the internal memory.
Nevertheless, the memorizing time becomes different depending
on the PTZ operation. OVER mark will finish this function.

Note

If the operation range is limited using

①

Pan Limit

and

②

Tilt Limit, only the operations within the limited

range are memorized.

Note

Press the OSD key to stop the internal memory to
continue saving.

5.3.6. Auto Run

If there is no controller operation by the user for a certain time, the
sequence operation designated by the user will be executed.

Mode:

OFF : Auto Run will be cancelled.

Preset : Auto Run in the corresponding Preset number

Swing : Auto Run in the corresponding Swing mode

Group : Auto Run in the corresponding Group number

Tour : Auto Run in the corresponding Tour number

Trace : Auto Run in the corresponding Trace number

A. Pan : 350° Auto Run in Pan direction

※

Auto Pan Speed: Pan operation in the speed designated by
the user

※

Tilt Angle: The tilt angle set up by the user is kept.

Summary of Contents for SNP-1000

















































































































Search results

Summary of Contents for SNP-1000

Reviews:

Samsung SNP-1000, User Manual, Page: 84 / 112

Search results

Summary of Contents for SNP-1000

Reviews: