14
Interface Gender Card (I/G Card)
"
The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality.
ECO SENSOR
IR
Parts
Description
DATA IN (Reverse)
Connects to the
DATA OUT
port on the last cabinet using an OCM cable.
DATA OUT (Forward)
Connects to the
DATA IN
port on the first cabinet using an OCM cable.
IR
Connects to an external IR cable that receives signals from the remote control.
"
Only one external IR cable is supplied.
"
To connect to an I/G card, select
System
→
Power Control
→
Network Standby
→
On
.
ECO SENSOR
Connects an external ambient light sensor to the
ECO SENSOR
port.
Automatically recognizes the ambient brightness and adjusts the brightness of the cabinet connected to the I/G card.
To turn off this function, set
Eco Sensor
to
Off
at
System
→
Eco Solution
.
"
Only one external ambient light sensor is provided. The external ambient light sensor operates with only one of multiple I/G
cards.
Even if multiple I/G cards are connected, external ambient light sensor operates with only the one I/G card connected at the top.
"
After connecting to or disconnecting from the
ECO SENSOR
port on the I/G card, reboot S-Box(SNOW-1810U).
"
Note that the cabinet may be subject to shadows or light interferences depending on the installation position.
"
The external ambient light sensor is marked with the label on the sensor cable.
HDBT IN
Connects to the
HDBT OUT
port on the S-Box by using a LAN cable.
