setup screen
Special Setup
1.
Select <
Special
>.
2.
Select each item and set it properly.
•
Day & night : You can switch the
mode to adjust the black and white
level as well as the colors.
- Color : Always displays the video in
colors.
- B/W : Always displays the video in
black and white.
- Auto : Displays in color mode
during normal daytime and switches to black and white mode in a low contrast
scene at night.
`
If you set the AGC mode to <
Off
> from <
Exposure
>, the AUTO DAY/NIGHT mode will be
disabled accordingly.
- External B/W : Control the image modes of Color and B/W when an external IR
is synchronized via the Alarm In port.
•
Dwell time : This is the time while each applicable lighting condition is kept in
order to enable the switch between day and night modes.
•
Duration : Specify the time interval of lighting at which the sequence operation is
triggered.
•
Sharpness mode : Adjust the overall sharpness of the image.
If selecting <
on
>, you can adjust the sharpness of the image.
•
Sharpness level : The higher the level is, the sharper and clearer the outline of the
image becomes.
•
Gamma : Adjust the contrast of the image.
•
Color level : Adjust the color level of the image.
•
Alarm in : Set the image to Color or B/W depending on the Open/Close state of
the alarm sensor.
`
If the Day & Night mode is set to External B/W, the alarm-in function of the event-alarm input page
will be disabled.
58_
setup screen