•
Codec : Sets the codec to be used.
- G.711 : A audio codec standard, it uses 64 Kbps PCM (Pulse Code Modulation)
encoding.
ITU standard audio codec that is adequate for digital voice transfer in PSTN
network or through a PBX.
- G.726 : ITU standard audio codec applying ADPCM (Adaptive Differential Pulse
Code Modulation) for variable bit rates of 40/32/24/16 Kbps to 64 Kbps PCM
encoding.
•
Bitrate : Set the bit rate to differentiate compression ratio if using G.726 codec.
•
Gain : Sets the input audio gain.
4.
Set the audio output level.
•
Enable : Sets whether to use audio output.
•
Gain : Sets the output audio gain.
5.
When done, click [
apply (
)
].
camera setup
You can change the camera settings according to the environment where the camera is
located.
1.
From the Setup menu, select the
<
video & audio ( )
> tab.
2.
Click <
camera setup
>.
3.
Configure the settings as necessary of :
SSDR, White balance, Backlight,
Exposure, Special, OSD, Time OSD,
IR Mode
4.
When done, click [
apply (
)
].
`
If a certain time (timeout: 240s) is elapsed with
your not pressing the [
Apply (
)
]
button after changing the settings, your
changes will not be applied.
English
_53
●
Setup
Screen