Samsung SNO-7082R User Manual Download Page 41

Page: 41 / 124

English

_41

●

we
B viewer

Item

Description

Full Screen

Switch the current video to the maximum size of the monitor.

Capture

Saves the snapshot as an image file in the .bmp or .jpg format.

Audio/Microphone

Control

Enable/disable audio and microphone, and controls volume.

Alarm output

Activate the Alarm Out port.

Hide the context

The left-corner context menu will disappear but only the menu icon.

to capture the snapshot

Click [

capture (

)

] on the scene to

capture.

The Capture dialog should appear.

Confirm the save path and click [

Save

]

button.

The screenshot will be saved in the

specified path.

If you encounter an interrupted video

when capturing the image with IE8 on a

Windows 7-based PC, deselect “

Turn On

Protected Mode

” from “

Tools – Internet Options – Security

”.

Summary of Contents for SNO-7082R





























































































































Search results

Summary of Contents for SNO-7082R

Reviews:

Samsung SNO-7082R, User Manual, Page: 41 / 124

Search results

Summary of Contents for SNO-7082R

Reviews: