English
_17
●
in
St
aLL
ation & connection
J
`
The BNC Out terminal of the product is provided for easier installation, and is not recommended
for monitoring purposes.
If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to
the product.
ethernet connection
Connect the Ethernet cable to the local network or to the Internet.
power Supply
Use the screwdriver to connect each line (+, –) of the power cable to the corresponding
power port of the camera.
J
`
Be careful not to reverse the polarity when you connect the power cable.
You can also use a router featuring PoE (Power over Ethernet) to supply power to the camera.
`
If PoE and DC12V power or PoE and AC 24V are supplied simultaneously, the product will operate
with the first applied power source.
`
If using PoE and DC 12V adaptor, the heater will not operate at all.
If the heater must be operated due to the installation environment, please use the AC 24V adaptor.
The adaptor is sold separately.
`
AC 24V can be applied in non-polarity.
`
Use AC 24V in a low-temperature place of less than -10°C.
`
Please make sure the monitor and camera are turned off when connecting them.