manualshive.com logo in svg

Samsung SND-6011R, User Manual, Page: 20 / 140

Share
Download
Samsung SND-6011R User Manual Download Page 20

installation & connection

20_

 installation & connection

inStaLLation (Sno-6011r )

 

J

 

`

This camera is waterproof and in compliance with the IP66 spec, but the jack connected to the 

external cable is not. You are recommended to install this product below the edge of eaves to 

prevent the cable from being externally exposed.

installation 

1. 

Attach the installation template to the 

selected area and punch 3 holes as shown in 

the figure.

2. 

Fix the camera in 3 holes by tightening the 

three tapping screws supplied with the 

product.

3. 

Connect the cables with the camera port.

4. 

Adjust the direction of the camera with a 

Philips screwdriver.

 

J

 

`

Loosen the bracket screws, adjust the camera’s 

position and tighten the screws when you adjust 

the position of the camera by using a bracket. If 

you adjust the camera’s position by force when 

the screws are tightened, the camera may be 

scratched or out of order.

Summary of Contents for SND-6011R













































































































































Reviews:

No comments