manualshive.com logo in svg

Samsung SND-6011R, User Manual, Page: 19 / 140

Share
Download
Samsung SND-6011R User Manual Download Page 19

English 

_19

●

  

in

St

aLL

ation & connection

installation

1. 

Attach the installation template to the 

selected area and punch 3 holes as shown in 

the figure. 

2. 

Use the 2 supplied screws to fix the camera 

to the 2 punched holes.

 

`

Set the <

FRONT TOP

> mark imprinted on the 

camera to face the direction of camera monitoring.

3. 

Connect the camera internal terminal with the 

corresponding cable.

4. 

Adjust the lens in a desired direction by 

referring to the “

adjusting the monitoring 

direction for the camera

” section. (page 22)

 

J

 

`

We recommend you not to touch the lens as the 

camera lens has been properly focused in the 

final process of manufacturing. If so, the lens may be out of focus or stained by alien substances.

5. 

Fasten the dome case (dome cover + camera case) 

to the main body as shown in the figure.

 

J

 

`

Pay attention to the direction for assembly.

6. 

Use one hand to hold the camera’s bottom part and 

turn the cover counterclockwise with another hand.

FRONT

TOP

VIDEO

RESET

1. ALARM IN

2. GND

Summary of Contents for SND-6011R













































































































































Reviews:

No comments