manualshive.com logo in svg

Samsung SND-6011R, User Manual, Page: 104 / 140

Share
Download
Samsung SND-6011R User Manual Download Page 104

setup screen

profile access

You can check the profile information.

1. 

From the Setup menu, select the 

<

System (   )

> tab.

2. 

Click <

profile access

>.

 

•

Profile access : Show the information 

of the newly added profile.

 - Profile : Show the information of the 

newly added codec.

 - Bitrate(kbps) : Show both the actual 

bit rate and the set bit rate.

 - Framerate(fps) : Show both the actual frame rate and the set frame rate.
 - ATC(%) : Show the ATC status.
 - Concurrent users count : Show the number of concurrent users who access the 

profile.

 

•

Current users : Shows information on users accessing web viewer and displaying 

monitoring video.

 - Profile : Show the name of the profile accessed by the user.
 - Bitrate(kbps) : Show the current bit rate.
 - Network connection status : You can check the network connection status.
 - IP : Show the IP address of the current user.

 

M

 

`

To check information on the profile currently used, click <

Profile access

> again to refresh it.

104_

 setup screen

Summary of Contents for SND-6011R













































































































































Reviews:

No comments