English
_61
●
SETUP SCREEN
To make recording on the SD memory
1.
Check the <
Total size
> and the <
Free size
>.
2.
If the SD memory has a sufficient free space, set <
Record
> to <
On
>.
Otherwise, check the stored data and if you find them not important, then click
<
Format
> to format the SD memory.
If your SD memory card writes slowly, only one frame per second will be stored.
For a SD memory card with a large capacity, the formatting will be slowed down accordingly.
If the size of data grows with time, only 1 fps can be stored even if you set the record quality to Full
Frame.
3.
Specify the record conditions.
•
Record profile : Display the number of profile to record.
•
Overwrite : If the SD memory is full, this will delete old data and store new data in
replacement.
•
Pre-alarm duration : Specify the time point before the occurrence of the alarm;
starting from the time point, the images will be transferred. You can specify up to
5 seconds before the occurrence of the alarm.
•
Post-alarm duration : Specify the time point after the occurrence of the alarm; to
the specified time point, the images will be transferred. You can specify up to 120
seconds after the occurrence of the alarm.
•
Normal : Make recording at a certain frame rate.
•
Event : Set the recording type for a certain event that occurs.
4.
Specify the <
Activation time
>.
•
Always : Always check if an alarm occurs. It activates in operated mode when the
alarm occurs.
If set to Always, the activation time cannot be changed.
•
Only scheduled time : Check if an alarm occurs at a specified day of the week for
a specified time period. It activates in operated mode when the alarm occurs.
•
[
] : Reset all settings.
5.
When done, click [
Apply (
)
].