manualshive.com logo in svg

Samsung SND-1011, User Manual, Page: 6 / 104

Share
Download
Samsung SND-1011 User Manual Download Page 6

overview

6_

 overview

Please read the following recommend safety precautions carefully.

 

Do not place this apparatus on an uneven surface.

 

Do not install on a surface where it is exposed to direct sunlight, near 
heating equipment or heavy cold area.

 

Do not place this apparatus near conductive material.

 

Do not attempt to service this apparatus yourself.

 

Do not place a glass of water on the product.

 

Do not install near any magnetic sources.

 

Do not block any ventilation openings.

 

Do not place heavy items on the product.

User’s Manual is a guidance book for how to use the products.

The meaning of the symbols are shown below.

 

Reference : In case of providing information for helping of product’s usages

 

Notice : If there’s any possibility to occur any damages for the goods and 
human caused by not following the instruction 

  Please read this manual for the safety before using of goods and keep it in 

the safe place.

Summary of Contents for SND-1011









































































































Reviews:

No comments