English
_49
●
SETUP SCREEN
BLC Setup
You can specify a desired area on the video manually and set the area to be displayed
more clearly.
1.
Select <
Backlight
>.
2.
Set <
Mode
> to <
BLC
>.
3.
Set <
BLC level
>.
You can change the level to adjust the
brightness of the monitoring area.
4.
Set the <
Top, Bottom, Left, Right
>
levels to specify the target area.
Exposure Setup
You can adjust the exposure level of the camera.
1.
Select <
Exposure
>.
2.
Select each item and set it properly.
•
Brightness : Adjust the screen
brightness.
•
Shutter mode : Adjust the electronic
shutter of the camera.
- ESC (Electronic shutter control) :
Adjust the shutter speed
automatically according to the
ambient brightness.
- Manual : Adjust the shutter speed of the camera manually.
- A.FLK (Anti flicker) : Select this feature if you encounter a flickering screen due
to a frequency mismatch with the ambient lighting.
•
Shutter speed : Control the shutter speed manually.
•
SSNR3 : Specify the use of noise reduction.
•
SSNR3 level : Adjust the noise reduction level.
•
Sens-up mode : Automatically senses the darkness level at night or in a low
contrast scene and extends the accumulation time accordingly for a bright and
sharp image.
If you set the shutter mode to Manual/A.FLK, SENS-UP mode will be deactivated.
The greater the Sens-Up factor is, the brighter the screen becomes but it may result in an
afterimage or video delay.