manualshive.com logo in svg

Samsung SND-1011, User Manual, Page: 18 / 104

Share
Download
Samsung SND-1011 User Manual Download Page 18

installation & connection

18_

 installation & connection

MEMORY CARD INFORMATION (NOT INCLUDED)

What is a memory card?

The memory card is an external data storage device that has been developed to offer an 
entirely new way to record and share video, audio, and text data using digital devices.

Selecting a memory card that’s suitable for you

Your camera supports Micro SD/SDHC memory cards.
You may, however, experience compatibility issues depending on the model and make of 
the memory card.

For your camera, we recommend you use a memory card from the following 
manufacturers:
Micro SD/SDHC Memory Card : Sandisk, Transcend

Playback performance can be affected depending on the speed of memory card, so use 
the high-speed memory card.

CONNECTING WITH OTHER DEVICE

 

J

 

The BNC Out terminal of the product is provided for easier installation, and is not recommended 
for monitoring purposes.
If you keep the BNC cable connected, a risk of lightening may cause damage or malfunction to 
the product.

Ethernet

Power

RESET

RESET

VIDEO

OUT

Monitor Out

Summary of Contents for SND-1011









































































































Reviews:

No comments