10
Auto Network Setup
Run <
IP Installer.exe
> to display the camera search list.
At the initial startup, both [
Auto Set
] and [
Manual Set
] will be grayed out.
For cameras found with the IPv6 setting, these buttons will be grayed out as the cameras do not
support this function.
Select a camera in the search list.
Find the MAC (Ethernet) address labeled on
the rear of the camera.
Both the [
Auto Set
] and [
Manual Set
]
buttons will be activated.
Click [
Auto Set
].
The AUTO SET dialog appears.
The <
IP Address
>, <
Subnet Mask
>, and
<
Gateway
> will be set automatically.
Enter the password.
This is the login password for the "
root
"
user who accesses the camera.
The default password is "
4321
".
Click [
OK
].
Auto network setup will be completed.
The camera will automatically complete
the network setting and restart.
M
1.
2.
3.
4.
5.
SNC-B2331-ENG-QG.indd 10
2009-08-20 오전 11:42:38