manualshive.com logo in svg

Samsung SNB-9000, User Manual, Page: 89 / 152

Share
Download
Samsung SNB-9000 User Manual Download Page 89

EVENT SETUP

FTP / E-mail

You can configure the FTP/E-mail server settings so that you can transfer the images taken 
with camera to your PC if an event occurs.

1. 

From the Setup menu, select the 
<

Event ( 

 )

> tab.

2. 

Click <

FTP / E-mail

>.

3. 

Select <

FTP configuration

> or 

<

E-mail configuration

> and enter / 

select a desired value.

 

•

FTP configuration

 

- Server address : Enter the IP 

address of the FTP server that you 
transfer the alarm or event images 
to.

 

- ID : Enter the user ID with which 

you will log in to the FTP server.

 

- Password : Enter the user account 

password for logging into the FTP server.

 

- Upload directory : Specify the FTP path where you will transfer the alarm or 

event images.

 

- Port : The default port of the FTP server is 21; however, you can use a different 

port number according to the FTP server settings.

 

- Passive mode : Select <

On

> if you need to connect in passive mode due to the 

firewall or the FTP server settings.

English 

_89

●

  

SETUP SCREEN

Summary of Contents for SNB-9000

























































































































































Reviews:

No comments