English
_67
●
SETUP SCREEN
Audio setup
You can configure the I/O settings of the audio source from the camera.
1.
From the Setup menu, select the
<
Video & Audio (
)
> tab.
2.
Click <
Audio setup
>.
3.
Set the audio input value.
•
Source : Sets the audio input.
- Line : Connect the cable to the
audio device.
- Internal microphone : Microphone
that is built-in in the camera.
•
Codec : Specify the audio codec.
- G.711 : A audio codec standard, it uses 64 Kbps PCM (Pulse Code Modulation)
encoding.
ITU standard audio codec that is adequate for digital voice transfer in PSTN
network or through a PBX.
- G.726 : ITU standard audio codec applying ADPCM (Adaptive Differential Pulse
Code Modulation) for variable bit rates of 40/32/24/16 Kbps to 64 Kbps PCM
encoding.
•
Bitrate : Set the bit rate to differentiate compression ratio if using G.726 codec.
•
Gain : Specify the audio input amplification.
J
Sound quality deterioration or howling may occur if the loudness of the sound source or gain value
were set excessively.
4.
Set the audio output level.
•
Enable : Sets whether to use audio output.
•
Gain : Specify the audio output amplification.
5.
When done, click [
Apply (
)
].