manualshive.com logo in svg

Samsung SNB-9000, User Manual, Page: 54 / 152

Share
Download
Samsung SNB-9000 User Manual Download Page 54

54_

 setup screen

SETUP

On the network, you can set up basic information on the camera, video and audio, network 
events and system.

1. 

In the Live screen, click [

Setup 

( 

 )

].

2. 

The Setup screen appears.

 

J

 

The setting page for preview video requires the STW web viewer plug-in to be installed on the PC. 
If it is not intalled properly, the installation page automatically apprears.

BASIC SETUP

Video profile

1. 

From the Setup menu, select the 
<

Basic ( 

 )

> tab.

2. 

Click <

Video profile

>.

3. 

Configure <

PTZ Mode

>.

PTZ mode can be activated by 
selecting it while the camera is on the 
outside.
When connecting to the camera from 
external NVR, ISV, our SmartViewer, 
and if the PTZ control command is 
sent from them, the PTZ mode the 
administrator already selected will be 
the one used for operation.
When DPTZ mode was selected, DPTZ 
is active in profile 1 set to DPTZ only.

setup screen

Summary of Contents for SNB-9000

























































































































































Reviews:

No comments