manualshive.com logo in svg

Samsung SNB-9000, User Manual, Page: 49 / 152

Share
Download
Samsung SNB-9000 User Manual Download Page 49

English 

_49

●

  

WEB VIEWER

Name of time search screen and its function

Item

Description

Time bar

The section in the specific period is played by moving the time bar.

b

Search date setting

Set the search date using the calendar.

 

If there is data saved in your Micro SD memory card or NAS on the 
day, it is marked as a box on the calendar.

c

Speaker 

To listen to a voice signal (if present) in the recorded video, then activate the 
voice signal icon when you play it.

Screen optimization

The camera image is converted to fit the Web browser window.

 

Fix the resolution

Regardless of the resolution setup configured in the camera, it sets 
the resolution to 800x600. Press it again to switch back to the default 
resolution.

Capture

The current image is saved as a .jpg image file.

Full screen

The current image is converted to cover the maximum size of the monitor.

b

c

 

Summary of Contents for SNB-9000

























































































































































Reviews:

No comments