manualshive.com logo in svg

Samsung SNB-9000, User Manual, Page: 20 / 152

Share
Download
Samsung SNB-9000 User Manual Download Page 20

installation & connection

20_

 installation & connection

CONNECTING WITH OTHER DEVICE

 

J

 

The CVBS out terminal of the product is provided for easier installation, and is not recommended 
for monitoring purposes.

Ethernet Connection

Connect the Ethernet cable to the local network or to the Internet.

Unit is intended for installation in a Network Environment 0 as defined in IEC TR 
62102. As such, associated Ethernet wiring shall be limited to inside the building.

Power Supply

Use the screwdriver to connect each line (+, –) of the power cable to the corresponding 
power port of the camera.

 

J

 

If you turn on PoE and DC12V and AC24V at the same time, the first applied one will be used as 
the power source.

 

-

You can also use a router featuring PoE to supply power to the camera.

 

-

Use PoE that is compliant with the IEEE802.3af protocols.

 

Be careful not to reverse the polarity when you connect the power cable.

 

AC24V can be connected in non-polar union.

 

If you want to connect an external device, you must turn off the external device before proceeding.

ACT

LINK

FOCUS

1  2  3  4  5  6  7  8  9  10

1: GND
2: Tx
3: Rx

4: RS-485 -
5: RS-485 +
6: EXT D/N

7: Alarm in 1
8: Alarm in 2

9: Alarm Out
10: COM

Monitor to install

Ethernet

Power

Grounding 
cable

Summary of Contents for SNB-9000

























































































































































Reviews:

No comments