Samsung SNB-8000 User Manual Download Page 62

Page: 62 / 172

62_

web viewer

Item

Description

Fix the resolution

Regardless of the resolution setup configured in the camera, it sets the resolution to

640x480. Press it again to switch back to the default resolution.

Full Screen

Switch the current video to the maximum size of the monitor.

Capture

Saves the snapshot as an image file in the .jpg format.

Manual recording

Users can save their video in the micro SD memory card or NAS on their own.

To take video manually, change the recording setting first. Refer to “

Storage

” for

how to set recording (page 111).

Audio/Microphone

Control

Enable Audio and Microphone are control the Audio volume.

Only the Audio volume can be controlled.

Alarm output

Activate the Alarm Out port.

External PTZ

Connect the external PTZ to the RS-485 terminal and control the PTZ camera lens

direction with the arrow keys.

Only for SNB-8000.

The pan/tilt operations will be enabled only if the camera is connected to a pan/

tilt-compliant receiver.

Hide the context

The left-corner context menu will disappear but only the menu icon.

Summary of Contents for SNB-8000













































































































































































Search results

Summary of Contents for SNB-8000

Reviews:

Samsung SNB-8000, User Manual, Page: 62 / 172

Search results

Summary of Contents for SNB-8000

Reviews: