Samsung SNB-8000 User Manual Download Page 169

pHp 3.01 License

The PHP License, version 3.01 Copyright (c) 1999 - 2010 The PHP Group. All rights reserved.

component name

License

urL

php-5.2.17

PHP 3.01 

http://www.php.net/distributions

Redistribution and use in source and binary forms, with or 

without modification, is permitted provided that the following 

conditions are met:

1.

  Redistributions of source code must retain the above 

copyright notice, this list of conditions and the following 

disclaimer.

2.

  Redistributions in binary form must reproduce the above 

copyright notice, this list of conditions and the following 

disclaimer in the documentation and/or other materials 

provided with the distribution.

3.

  The name "PHP" must not be used to endorse or promote 

products derived from this software without prior written 

permission. For written permission, please contact 

[email protected].

4.

  Products derived from this software may not be called 

"PHP", nor may "PHP" appear in their name, without 

prior written permission from [email protected]. You may 

indicate that your software works in conjunction with PHP 

by saying "Foo for PHP" instead of calling it "PHP Foo" 

or "phpfoo"

5.  

The PHP Group may publish revised and/or new versions 

of the license from time to time. Each version will be given 

a distinguishing version number. Once covered code has 

been published under a particular version of the license, 

you may always continue to use it under the terms of that 

version. You may also choose to use such covered code 

under the terms of any subsequent version of the license 

published by the PHP Group. No one other than the PHP 

Group has the right to modify the terms applicable to 

covered code created under this License.

6.

  Redistributions of any form whatsoever must retain the 

following acknowledgment: "This product includes PHP 

software, freely available from <http://www.php.net/

software/>".

THIS SOFTWARE IS PROVIDED BY THE PHP 

DEVELOPMENT TEAM ``AS IS'' AND ANY EXPRESSED 

OR IMPLIED WARRANTIES, INCLUDING, BUT 

NOT LIMITED TO, THE IMPLIED WARRANTIES OF 

MERCHANTABILITY AND FITNESS FOR A PARTICULAR 

PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE 

PHP DEVELOPMENT TEAM OR ITS CONTRIBUTORS 

BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, 

SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES 

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF 

SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, 

OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER 

CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER 

IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING 

NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT 

OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF 

THE POSSIBILITY OF SUCH DAMAGE.
This software consists of voluntary contributions made by 

many individuals on behalf of the PHP Group. The PHP 

Group can be contacted via Email at [email protected].
For more information on the PHP Group and the PHP 

project, please see <http://www.php.net>. PHP includes the 

Zend Engine, freely available at <http://www.zend.com>.

Copyright (C) 1995-2010 Jean-loup Gailly and Mark Adler
Permission is granted to anyone to use this software for any 

purpose, including commercial applications, and to alter it 

and redistribute it freely, subject to the following restrictions:

1.

  The origin of this software must not be misrepresented; 

you must not claim that you wrote the original software. If 

you use this software in a product, an acknowledgment 

in the product documentation would be appreciated but 

is not required.

2.

  Altered source versions must be plainly marked as such, 

and must not be misrepresented as being the original 

software.

3.

  This notice may not be removed or altered from any 

source distribution.

Jean-loup Gailly Mark Adler
[email protected] [email protected]
The data format used by the zlib library is described by RFCs 

(Request for Comments) 1950 to 1952 in the files http://

www.ietf.org/rfc/rfc1950.txt (zlib format), rfc1951.txt (deflate 

format) and rfc1952.txt (gzip format).

zlib / libpng License

This software is provided 'as-is', without any express or implied warranty. In no event will the authors be held liable for any 

damages arising from the use of this software.

component name

License

urL

zlib-1.2.5

zlib / libpng

http://zlib.net/

Summary of Contents for SNB-8000













































































































































































Reviews: