setup screen
72_
setup screen
5.
Select a desired <
Defined Area Based Rules
>.
•
Entering : This event rule detects an event of object’s center entering into the
defined area from outside through the boundary of the area.
•
Exiting : This event rule detects an event of object’s center exits from the inside of
the defined area through the boundary of the area.
Up to 3 event rules can be defined for virtual line based rules and defined area based rules.
6.
Click [
OK
].
To cancel the existing area, right-click on the Defined area to display the popup dialog
and select [
Delete
] in the context menu.
7.
When done, click [
Apply (
)
].
To set entire area based rule
1.
Set <
IV analysis function
> to
<
Enable
>.
2.
Set the type to <
Line/Area/Scene
Change
>.
3.
If you set the event rule to <
Entire
area based rules
>, this will display the
popup window.
4.
Select a desired <
Entire Area Based
Rules
>.
•
Scene Change : An event where the screen is changed at more than a certain time
interval will be detected.
Detecting a scene change may take a while from the actual change.
For stability purposes, the operation pauses for a short period when a scene change event occurs,
and no other detection instance of events (including scene change) functions within the duration.
Detection performance may drop under circumstances such as monotonous background, night or
low lighting.
5.
Click [
OK
].
To cancel the existing area, right-click on the Entire area to display the popup dialog
and select [
Delete
] in the context menu.
6.
When done, click [
Apply (
)
].