Samsung SNB-7000 User Manual Download Page 40

Page: 40 / 114

40_

web viewer

When done, click <

Close and restart the web browser, and
try to access the Web Viewer.
When Silverlight Runtime is properly
installed, you will see the Live screen.



For normal installation, set the Block
Popup setting as follows:
ex)

Internet Explorer



Tools



Block

Popup



Turn Off Pop-up Blocker (B)



However, MAC OS X users who are not connected to the Internet can use the provided installation
CD to install Silverlight Runtime (Run the executable “Silverlight_xxx.dmg” in the CD. You will be
guided through installation of the software).



ActiveX and Silverlight Web Viewer can operate in the following conditions:

Internet Explorer : Open the ActiveX viewer. It can be run in all resolutions.

Other browsers: Open the Silverlight viewer. For H.264, resolutions of 1600 x 1200 and
2048 x 1536 (Exceeds 1920 x 1080) cannot be displayed.

Summary of Contents for SNB-7000



















































































































Search results

Summary of Contents for SNB-7000

Reviews:

Samsung SNB-7000, User Manual, Page: 40 / 114

Search results

Summary of Contents for SNB-7000

Reviews: