manualshive.com logo in svg

Samsung SNB-7000, User Manual, Page: 14 / 114

Share
Download
Samsung SNB-7000 User Manual Download Page 14

overview

14_

 overview

Item

Description

c

System, Power, 
SD Indicators

POWER

ON : While the power is on

OFF : If the power is off

Reset Button

Resets the camera settings to the default. Press and hold it for about 5 
seconds to turn off the system indicator and restart the system.

J

  

If you reset the camera, the network settings will be adjusted so that 
DHCP can be enabled. If there is no DHCP server in the network, you 
must run the IP Installer program to change the basic network settings 
such as IP address, Subnet mask, Gateway, etc., before you can 
connect to the network.

Power Port

Used to plug the power cable.

GND

Used for earth-grounding.

Network Port

Used to connect a PoE or LAN cable.

I/O Port

ALARM IN

Used to connect the alarm input signal.

ALARM OUT

Used to connect the alarm output signal.

ALARM COM Common port where the alarm output signal is connected.

GND

Used for earth-grounding.

RS-485+

RS-485 Data line

RS-485-

RS-485 Data line

Video Out Port

Analog video output port. (for installation)

 

J

 

RS-485 port only supports direct connection with pan/tilt driver and external connections of the 
RS-485 controller is not supported.

Summary of Contents for SNB-7000



















































































































Reviews:

No comments