manualshive.com logo in svg

Samsung SNB-6011, User Manual, Page: 14 / 148

Share
Download
Samsung SNB-6011 User Manual Download Page 14

overview

14_

 overview

Rear of the main unit 

Item

Description

Power supply 
terminal

Terminal used to connect to the DC12V power adaptor.

b

Network connection 
terminal

Terminal used to connect to PoE or LAN via the RJ-45 cable.

c

In/out terminal

GND

Ground terminal.

ALARM OUT

The terminal sends the alarm output signal.
Refer to “Alarm Out Wiring Diagram” (page 23).

ALARM IN

The terminal sends the alarm input signal.
Refer to “Alarm In Wiring Diagram” (page 22).

Reset Button

The button restores all camera settings to the factory default.
Press and hold for about 5 seconds to reboot the system.

J

 

If you reset the camera, the network settings will be adjusted so that  

 

DHCP can be enabled. If there is no DHCP server in the network, you  

 

must run the IP Installer program to change the basic network settings  

 

such as IP address, Subnet mask, Gateway, etc., before you can  

 

connect to the network.

Power indicators

POWER

ON : While the power is on
OFF : If the power is off

Test Monitor Out

Output port for test monitoring the video output. Use the test monitor cable 
to connect to a mobile display and check the test video.

'&9

1(7:25.

/,1.

   

$&7

5(6(7

32:(5

*1'
$/$50287
$/$50,1

9,'(2

b

c  

Summary of Contents for SNB-6011





















































































































































Reviews:

No comments