manualshive.com logo in svg

Samsung SNB-6005, User Manual, Page: 95 / 158

Share
Download
Samsung SNB-6005 User Manual Download Page 95

Storage

You can activate recording on your device, set the recording conditions, check the saved 

data capacity and format the device itself.

1. 

From the Setup menu, select the 

<

event (   )

> tab.

2. 

Click <

Storage

>.

3. 

Select a device to save data in.

 

M

 

`

If your device is properly recording data, it 

will display “

Recording

”.

 

`

If you see an “Error” message, check the 

following:

 

-

Check the storage to see if it is 

connected to the device.

 

-

Check the files in the storage to see if 

they are damaged.

 

-

Check the storage to see if they are 

physically damaged.

 

`

If the “Error” message does not disappear after following the instructions, format the Micro SD 

card. 

After formatting, if the error message still remains, replace the Micro SD card.

 

`

If you remove the Micro SD card without changing a button to ‘off’ position in settings or if you 

connect a camera to an unstable power source, the Micro SD card may be damaged.

English 

_95

●

  

Setup 

Screen

Summary of Contents for SNB-6005































































































































































Reviews:

No comments