Samsung SNB-6005, User Manual, Page: 79 / 158

English _79
●
Setup
Screen
Smart codec
Set a desired area of the video incoming from the camera as ROI area and specify the
detection sensitivity for the area.
1. From the Setup menu, select the
< video & audio ( ) > tab.
2. Click < Smart codec >.
3. Select ROI Area.
• Face detection : Active if a face is
recognized on the monitoring screen.
J `
You can detect max 35 faces on the
screen at the same time.
`
The minimum size of detectable face is
45x45 (horizontal x vertical) pixels for the
given max resolution. But there may be
some errors depending on the characteristics of your face or lighting.
• Manual : Specify the ROI area to monitor manually.
4. Set the image quality.
The ROI area will be displayed in the specified quality.
5. If manually specifying the ROI area, select a desired area with the mouse pointer and
drag it as much as you want.
`
You can specify up to 5 distinct areas.
6. To cancel all the settings for the area, click the [ clear ( ) ] button.
7. When done, click [ apply ( ) ].
J
`
The Smart codec will not be active if it is set to < Off > in < Video profile >. (page 56)
`
Go to < Event >

< Face detection > and change it to < Enable > to set the desired area for
facial detection.